FENDER-EDGE
PneumaCell™
Pneumatic Rubber Fender | Yokohama Type Fender
FENDER-EDGE
PneumaCell™ Introduction
FENDER-EDGE‘s PneumaCell™ are expertly designed and manufactured with superior quality, durable materials. We aim to fully unleash pneumatic fender’s strength, ensuring it maintains excellent performance even under extreme operating conditions.
ISO 17357-1:2014 JUST BE THE FOUNDATION. FENDER-EDGE Pneumatic Fender service include R&D, designing, testing and stringent quality control. All pneumatic fenders design foundation is according to ISO 17357-1:2014 to offer improved durability and safety performance.
In the past 15 years FENDER-EDGE’s attention to each detail during the manufacturing process, wherever customer can see or not. Therefore, these fenders has already surpassed ISO17357 in various performance indicators.
These characteristics combine low reaction force, high energy absorption and low hull pressure with excellent berthing capabilities.These fenders adopt solid construction to improved durability and safety. Design service lifespan could reach 15 years.
- Ship to Ship Transfer
- Ship to Shore
- Temporary Berthing
- Port High Tidal Variations
- Submarines
FENDER-EDGE
PneumaCell™ Classification
Type I - Chain tire Net fender
D3,300mm*L6,500mm NET TYPE DRAWING
Chain Tire Net (CTN) Fenders (Type I) constructed from a matrix of used tires interconnected by galvanized steel chains arranged in horizontal and vertical networks.The chains are fastened with hammerlocks at each intersection, and connected to the towing lug with shackles.
Type II - Sling Type Fender
D3,300mm*L6,500mm SLING TYPE DRAWING
FENDER-EDGE’s Sling Type Fenders (Type II, without chain tire net.) are expertly manufactured to ISO 17357 standards. This type fender can be slung by chains or wire ropes during operation. These fenders are available across the entire range of sizes.
FENDER-EDGE
To Address Key Challenges in Marine Projects
ISO 17357-1:2014
FENDER-EDGE PneumaCell™ design and manufacture truly comply with ISO 17357-1:2014. But not only ISO 17357...
Differentiated Design
FENDER-EDGE driving growth through secure, stable and streamlined operations (Technical Drawing Available)...
Total Quality Assurance
"FENDER-EDGE Pneumatic Fender White Paper" deliver a technical analysis of PneumaCell™ superiority...
Extended Warranty Protection
FENDER-EDGE PneumaCell™ include 24-months extended coverage–Ensuring your peace of mind after procurement...
Supply Chain Value Capture
FENDER-EDGE optimize raw material supply chain, operating instructions, manufacturing methods and process etc. to achieve cost efficiency against industry benchmarks...
Extended Service Life
FENDER-EDGE PneumaCell™ design service life is 15 years (According to OCIMF guidelines), which truly on service pneumatic fenders beyond 8 years...
On-Time Delivery Safeguard
We understand that timely delivery is critical to keeping your procurement and construction projects on track. Daily liquidated damages of contract value.
Technical Partnership
Fender Structural Design, Rubber Compounding Process, Testing Methods, Production Processes etc. Technical supports comes from rich on-site experience and expertise.
FENDER-EDGE
CONTACT US
Your Message Will Be Replied In a Minute.
Manufacturing Center
Southern Industry Zone, Jimo District,
Qingdao City, Shandong,
P.R. China
+ 86 185-6012-2692
+ 86 185-6012-2692
FENDER-EDGE
PneumaCell™ Superior Construction
Fender Body Construction
① Outer Rubber Layer Part ② Synthetic Tire Cord Layer Part ③ Inner Rubber Layer Part ④ Air Tightness Layer Part
6 Times Safety Factor
The ratio of the fender bursting pressure to the initial pressure designed must be at least 6 times to ensure absolute safety.
15 Years Service life
Fender design service life is 15 years comply with the requirements that OCIMF recommended.
24 Months Warranty
100% compensation caused by fender quality within 24 months.
0 Pressure Loss
QC department require that no air leakage under initial pressure for 48 hours.
Chain Tire Net Construction
① Swivel ② D Type Shackle ③ Towing Device ④ Rubber Sleeve ⑤ Truck/Aircraft Tire ⑥ Butterfly Shackle ⑦ Chain Net
Full Protection
All chains are covered with high strength rubber sleeve to maximize the safety of fender body.
Heavy-Duty
The metal parts are firm and reliable, all hot-dip galvanized treatment with highly corrosion-resistant.
Anti-Detachment Safeguard
Chain net end structural parts are optimized in design (the part is easy to detach) to prevent net detachment.
Advanced Net Design
Chain net design is carried out based on comprehensive factors such as safety performance, application environment, transportation and cost.
FENDER-EDGE
PneumaCell™ Customized
Size Customized
Non-standard fender size customized to meet different application scenarios.
Color Customized
Regular black/navy grey/red/other customized to meet different hull colors.
Initial Pressure Customized
Initial internal pressure Customized: 30kPa/50kPa/80kPa/100kPa etc.
Structural Device Customized
Fender end structural device design to realize multiple functions such as water injection, pressure release, pressure measurement and inflation.
CTN Customized
CTN (Chain Tire Net) Customized: Metal parts, truck/aircraft tire, chain net etc.
Hydro Pneumatic Fender
Customized pneumatic fender apply for submarine berthing.
FENDER-EDGE
ISO 17357-1:2014 Prototype Test
WHAT IS ISO 17357-1:2014
ISO 17357-1:2014 is an international standard that specifies the requirements for pneumatic fenders used in marine applications, particularly for ship-to-ship and ship-to-quay operations. It defines the design, performance, and testing criteria for these fenders, ensuring that they provide adequate protection to ships and infrastructure during docking or mooring, especially in rough conditions. The standard outlines the necessary specifications for fender size, pressure, and durability, aiming toprevent damage during interactions between vessels and berthing points.
Physical properties of outer rubber, Physical properties of inner rubber etc.
Fender length:+10%,-5%, Fender diameter:+10%,-5%.
The air-leakage test shall be conducted on all fenders at initial pressure for more than 30 min, and the test results shall confirm that there is no air leakage
The increase in diameter and length shall be obtained by measuring the distance of two points marked circumferentially and longitudinally at 10kPa pressure on fender’s body. The distance between the two points shall be larger than one-fifth of the fender’s diameter. The temporary elongation shall be measured after maintaining the rated hydrostatic pressure for 10 min.
The test shall be repeated twice with an interval of 5 min between the two tests. The energy absorption and the reaction force shall be obtained from the mean value of the two test records.
The test shall be repeated twice with an interval of 5 min between the two tests.The energy absorption and the reaction force shall be obtained from the mean value of the two lest records.
The test shall comprise 3000 repetitive cycles of parallel compression from the original diameter to the maximum deflection. After 3000 cycles, there is no cracks and other harmful detects on any part of the fender. No reduction of the GEA shall be accepted.
After compression of the fender to the guaranteed energy-absorption deflection, the fender shall be kept in this compressed state for 1 min, then the load shall be released instantaneously.
The test conducted in accordance with the static puncture test (CBR test) in ISO 12236.
Synthetic type cord density, tensile strength etc.
Test report list.
FENDER-EDGE
PneumaCell™
Related Resources
FENDER-EDGE PneumaCell™ Brochure
FENDER-EDGE‘s PneumaCell™ is expertly designed and manufactured with superior quality, durable materials. We aim to fully unleash pneumatic fender's strength, ensuring it maintains excellent performance even under extreme operating conditions
FENDER-EDGE Pneumatic Fender White Paper
The white paper details the FENDER-EDGE PneumaCell™ comprehensive performance, how we comply with ISO 17357 standard, and compares key manufacturing processes and configurations for pneumatic fenders—analyzing their impact on performance, safety, and service life.
FENDER-EDGE PneumaCell™ Performance Test Report
This report provides a detailed breakdown of PneumaCell (Pneumatic Fender) performance test into three parts. These three parts directly determine the safety performance, enabling users to intuitively and logically understand the superiority of PneumaCell™.
FENDER-EDGE PneumaCell™ Post-Delivery Service Manual
FENDER-EDGE PneumaCell™ comes with a 24-month warranty. This manual details the associated warranty coverage. Additionally, FENDER-EDGE provides full life-cycle technical support and services, including Root Cause Analysis (RCA), to safeguard customer interests and reduce after-sales costs.
FENDER-EDGE PneumaCell™ Operation Manual
This manual details handling, storage, installation and maintenance of PneumaCell™. FENDER-EDGE’s PneumaCell™ is almost maintenance-free. They are ideal partner for permanent and semi-permanent fender solutions for ports as well as ship-to-ship transfers.
FENDER-EDGE PneumaCell™ Technical Parameter
PneumaCell™ P50 (50kPa) & PneumaCell™ P80 (80kPa) Size, Performance, Pressure Requirements.
